Acta Physica Polonica A
Vol. 129 No. 4 April 2016
Special Issue of the 5th International Advances in Applied Physics and Materials Science Congress & Exhibition APMAS2015,
Lykia, Oludeniz, Turkey, April 16-19, 2015

Preface
Full Text PDF

Fabrication and Characterization of AgNPs Incorporated PVA/ODA-MMT and PVP/ODA-MMT Nanofiber Structures by Green Electrospinning Nanotechnology as Excellent Conducting and Bioengineering Nanomaterial
U. Bunyatova, Z. Rzayev, İ.C. Koçum, M. Şimşek, M.B. Yürüksoy, page 431,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.431

A New Perspective on Cyclic Loading Behavior Analysis of ATSP-Adjustable Telescopic Steel PROP S235GT Material Used in Structural Engineering
Ö. Karaçalı, page 436,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.436

Investigation of Surface Roughness and Chip Forms in Milling of Stainless Steel by MQL Method
A. Uysal, F. Demiren, E. Altan, page 439,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.439

Surface Roughness in Drilling of Electrically Conductive Polyamide
A. Uysal, E. Altan, page 442,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.442

Joint Strength Optimization of Bi-Adhesively Bonded Composite-Aluminum Sandwich Structure
M.U. Uysal, page 445,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.445

Three-Dimensional Finite Element Analysis of Mixed Adhesive Bonded Joints under In-Plane Shear Loading
M.U. Uysal, page 448,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.448

Production of Sodium Silicate Cullets by Using Trona
İ. Özkan, page 451,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.451

Study of the Nickel-Tungsten and Nickel-Cobalt Coatings Plated on Ductile Iron
A. Ayday, H. Skulev, page 455,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.455

Micromechanics Investigation of Wood Cell Walls under Compression Loading
E. Günay, H. Golmohammadi, page 459,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.459

Near-Infrared Tunable Reflection and Absorption Using Nanostructured Thin Film Structures Employing Phase-Change Material
A. Ozdemir, H. Kocer, page 464,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.464

First Principles Calculation of ε-Phase of Solid Oxygen
K.H. Kamaruddin, A.F.Z. Abedin, N.A. Zabidi, M.Z.A. Yahya, M.F.M. Taib, A.N. Rosli, page 468,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.468

Nonlinear Waves in GaAs Semiconductor
U.M. Abdelsalam, F.M. Allehiany, W.M. Moslem, page 472,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.472

High Aspect Ratio Graphene Nanosheets Cause a Very Low Percolation Threshold for Polymer Nanocomposites
R. Jan, A. Habib, H.Y. Abbasi, page 478,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.478

Soda Lime Silicate Glass-Copper Metal Joining by Controlled Heat Treatments in Air
M.B. Telli, page 482,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.482

Effect of Sodium Sulfate Addition on the Production of Ferronickel from Lateritic Ore
T.T. Parlak, K. Yıldız, page 485,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.485

Mechanical Characteristics of As2S3 Glasses Induced by Doping with Bismuth
M.V. Šiljegović, S.R. Lukić-Petrović, D.M. Petrović, I.R. Videnović, I.I. Turyanytsa, page 488,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.488

Effect of Silane as Coupling Agent on Dynamic Mechanical Properties of Volcanic Ash Filled PPS Composites
O. Çoban, M.Ö. Bora, T. Kutluk, S. Fidan, T. Sınmazçelik, page 492,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.492

Surface Modification Effect of Volcanic Ash Particles Using Silane Coupling Agent on Mechanical Properties of Polyphenylene Sulfide Composites
M.Ö. Bora, O. Çoban, S. Fidan, T. Kutluk, T. Sinmazçelik, page 495,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.495

Silane Coupling Efficiency on Thermal Properties of Volcanic Ash Filled PPS Composites
T. Kutluk, O. Çoban, M. Ö. Bora, S. Fidan, T. Sınmazçelik, page 498,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.498

Optimizing the Lightweight Ceramic Proppants Properties
P. Wisniewski, J. Szymanska, M. Malek, J. Mizera, page 501,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.501

Effects of the Addition of Calcium Acetate into Silicate-Based Electrolytes on the Properties of MAO Coatings Produced on Zirconium
S. Cengiz, Y. Azakli, M. Yazici, B. Gayretli, Y. Gencer, M. Tarakci, page 504,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.504

Kinetic Analysis of Thermal Processes in Ag-As-S-Se System Based on DSC Measurements
K.O. Čajko, S.R. Lukić-Petrović, G.R. Štrbac, T.B. Ivetić, page 509,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.509

Time Series Artificial Neural Network Approach for Prediction of Optical Lens Properties
A.H. Isik, N. Isik, page 514,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.514

Characterization of the Stones Used on Walls in Teos Hellenistic Period
Y. Polat, N. Tamsu Selli, page 517,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.517

Characterisation of the Ancient City of Teos Western Necropolis Sherd Samples
R.T. Polat, A. Tunalı, page 521,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.521

Characterization of Sm and Nd Co-Doped Ceria-Based Electrolyte Materials
A. Arabacı, Ö. Serin, V. Sarıboğa, M.F. Öksüzömer, page 524,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.524

Technological Properties of Ceramic Slurries Based on Silicon Carbide with Poly(vinyl alcohol) Addition for Shell Moluds Fabrication in Precision Casting Process
M. Malek, P. Wisniewski, J. Szymanska, J. Mizera, K.J. Kurzydlowski, page 528,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.528

Size Dependent Properties of Hollow Gold Nanoparticles: A Theoretical Investigation
S. Senturk Dalgic, page 531,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.531

Computational Modeling of the Liquid Structure of Grossular Ca3Al2Si3O12 Glass-Ceramics
S. Senturk Dalgic, V. Guder, page 535,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.535

Bandwidth Improvement for Compact Microstrip Patch Antenna Using Metamaterials
T. Bougoutaia, D. Khedrouche, A. Hocini, page 538,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.538

Welding Time Effect on Mechanical Properties in Resistance Spot Welding of S235JR(Cu) Steel Sheets Used in Railway Vehicles
N. Akkaş, E. İlhan, F. Varol, S. Aslanlar, page 541,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.541

Investigation of Wear Behaviors of Precipitation-Strengthened Nickel-Copper Based K-500 Alloy Produced by Powder Metallurgy
U. Esgin, D. Özyürek, H. Kaya, page 544,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.544

Metallurgical, Mechanical and Electrochemical Behavior Study of the Lamellar Gray Cast Iron Treated with Vanadium
M.O. Azzoug, N. Boutarek, R. Drıf, N. Madaouı, K. Boulgheb, page 548,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.548

Investigation of the Basic Properties of Ceramic Proppants in Raw State Obtained by the Method of Mechanical Granulation
D. Zarzycka, P. Wisniewski, M. Malek, J. Szymanska, J. Mizera, page 552,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.552

Study of Two-Dimensional Photonic Crystal Microcavities as a Function of Refractive Index
R. Moukhtari, A. Hocini, D. Khedrouche, page 556,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.556

An Investigation of the Effects of Ageing Parameters on Wear Behaviours and Electrical Conductivity of Cu-Co-Be Alloys
D. Özyürek, M. Yıldırım, T. Tunçay, page 559,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.559

Suppressing Activity of an Array of Coupled Fitzhugh-Nagumo Oscillators
E. Adomaitienė, G. Mykolaitis, S. Bumelienė, A. Tamaševičius, page 562,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.562

The Effects of B4C Amount on Hardness and Wear Behaviours of 7075-B4C Composites Produced by Powder Metallurgy Method
H. Ay, D. Özyürek, M. Yıldırım, B. Bostan, page 565,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.565

Using of Boron Waste as a Shielding Material on Landmine Detection with NBS Imaging Technique
D.Y. Baysoy, page 569,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.569

Cavitation Damage Behavior in Seawater for Al-Mg Alloy Arc Thermal Spray Coating with Mg Content
I.C. Park, S.J. Kim, page 572,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.572

Sensitizing Effects of Ti Alloying Contents on Damage Behavior of Austenitic Stainless Steel Exposed to Ultrasonic Vibratory Cavitation
J.H. Lee, S.J. Kim, page 578,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.578

Corrosion Resistance of the Inconel 740H Nickel Alloy after Pulse Plasma Nitriding at a Frequency of 10 kHz
R. Sitek, J. Kaminski, J. Mizera, page 584,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.584

Wear Behavior of DIN 1.2210 Steel Modified by a Pulse Plasma Technique
Y.Y. Özbek, T. Gökkaya, C.V. Yavaşcan, page 588,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.588

Production of Aluminum Glass Fiber Reinforced Foam Synthesized by Space-Holder Technique
A.T. Ertürk, page 592,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.592

Characterization of Ternary Mg-Sn-Mn Alloys
A.E. Gulec, Z.C. Oter, K.O. Gunduz, M. Tarakci, Y. Gen-cer, page 596,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.596

The Mechanical Properties and Wear Resistance of HVOF Sprayed WC-Co Coatings
Y.Y. Özbek, N. Canikoğlu, M. İpek, page 600,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.600

Determination of the Young Modulus of Ti-TiAl3 Metallic Intermetallic Laminate Composites by Nano-Indentation
T. Yener, S. Güler, S. Siddique, F. Walther, S. Zeytin, page 604,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.604

Investigation of the Properties of Molybdenum Nanocube Crystals Deposited by Dc Sputtering
S.M. Borghei, page 607,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.607

Effect of Mechanical Activation on the Structural Properties of Mn-Doped Na0.5Bi0.5TiO3 Ceramics
D. Kırsever, H. Özkan Toplan, page 610,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.610

A Novel High Strain Rate Sensitive Rigid Polyurethane Resin Based Syntactic Foam
M. Yazıcı, page 613,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.613

Effects of Fuel Contamination to Marine Lubricant on Friction Behaviors between Piston Ring and Cylinder Liner
Z. Aydin, Ö. Savaş, A. Parlak, İ. Keskin, K. Ünlügençoğlu, page 617,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.617

Poly(vinyl alcohol) Based Polymer Gel Electrolytes: Investigation on Their Conductivity and Characterization
S. Çavuş, E. Durgun, page 621,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.621

Influence of Surface Modification Methods on the Topography of Dental Implants by Using Metrological Observation Techniques
A.G. Bulutsuz, Ç.Ü. Mercan, G. Karapınar, A.B. Katiboğlu, M. Lewandowska, page 625,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.625

Classification of Electron Gun Operation Modes Using Artificial Neural Networks
N. Isik, A.H. Isik, page 628,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.628

Electrochemical Characterization of Al3+ Doped Spinel Cathode Active Nanoparticles for Li-Ion Batteries
E. Bulut, M. Can, M. Özacar, H. Akbulut, page 631,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.631

Material Analysis and Application for Radio Frequency Electromagnetic Wave Shielding
S.C. Yener, O. Cerezci, page 635,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.635

A Novel Method for Manufacturing Polymer/Metal Hybrid Structures
M. Altan, B. Yavuz, page 639,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.639

Synthesis and Characterization of a Water-Soluble Ionic Polyacetylene Derivative
Y.S. Gal, S.H. Jin, J. Park, K.T. Lim, page 642,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.642

Optical Properties of Nano-Crystalline Zirconia Thin Films Prepared at Different Post-Oxidation Annealing Times
A. Hojabri, S. Pourmohammad, page 647,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.647

Microstructure and Hardness Characteristics of Al2O3-B4C Particle-Reinforced Cu Matrix Composites
K.E. Öksüz, Y. Şahin, page 650,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.650

Effect of Aluminum Addition to Nb-Al-C-N Coatings on AISI M2 Steel Obtained by Thermo-Reactive Deposition Technique
E. Abakay, S. Sen, U. Sen, page 653,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.653

Investigation of the Effect of Different Current Loads on the Arc-Erosion Performance of Electrical Contacts
S. Biyik, M. Aydin, page 656,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.656

Corrosion Behavior of in-Situ AlB2/Al-Cu Metal Matrix Composite
H. Elcicek, Ö. Savaş, Z. Aydin, O.K. Özdemir, R. Kayikci, page 661,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.661

Apatite Wollastonite-Reinforced Hydroxyapatite Biocomposites
F. Çalışkan, page 665,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.665

Nuclear Data Evaluation for 217Th
S.S. Nafee, A.M. Al-Ramady, S.A. Shaheen, page 669,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.669

Effects of Pulse Duration on Structure and Surface Characteristics of Micro-Arc Oxidation Coatings Formed on Aluminum Alloy
M.S. Yilmaz, O. Şahin, page 673,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.673

Influence of Borosilicate Addition on Mechanical Properties and Sinterability of 8YSZ
B. Aktas, page 677,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.677

Study of Thermal Annealing Effect on the Properties of Silver Thin Films Prepared by DC Magnetron Sputtering
F. Hajakbari, M. Ensandoust, page 680,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.680

Improvement of the Toughness and Crack Propagation Resistance Properties of Poly(Phenylene Sulfide)
B. Cetin, A.E. Sahin, N.G. Karsli, T. Yilmaz, T. Sinmazcelik, I. Curgul, page 683,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.683

Influence of Parameters on Dry Sliding of Chopped Bamboo Reinforced Epoxy Composites Based on the Taguchi Method
N. Ozsoy, M. Ozsoy, A. Mimaroglu, page 687,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.687

Optimized Temperature in Phosphorous Diffusion Gettering Setup of Chromium Transition Metal in Solar Grade Multicrystalline p-Type Silicon Wafer
D. Bouhafs, N. Khelifati, Y. Kouhlane, page 690,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.690

Tailoring of Magnetic Properties and Magnetoimpedance Effect in Thin Amorphous Wires
A. Zhukov, A. Talaat, M. Ipatov, J.M. Blanco, V. Zhukova, page 694,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.694

Mechanical Behavior of Clinched Sheet Material Joints and Strength Design Procedure
X.C. He, A.F. Gao, H.Y. Yang, B.Y. Xing, page 698,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.698

Corrosion and Tribocorrosion Behavior of Cast and Machine Milled Co-Cr Alloys for Biomedical Applications
F. Mindivan, M.P. Yıldırım, F. Bayındır, H. Mindivan, page 701,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.701

Investigation of Radiation Shielding Properties of Polypropylene Fiber Reinforced Shotcrete
M.A. Çakıroğlu, page 705,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.705

A Study on Discharge Characteristics by Using MF and RF Power in Remote Dielectric Barrier Discharge
D.J. Kim, Y.K. Shim, H.J. Kim, J.G. Han, page 707,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.707

Electroluminescence Enhancement of Polymer Light Emitting Diodes Through Surface Plasmons by Ag Nanoplates
T.H.T. Aziz, M.M. Salleh, N.A. Bakar, A.A. Umar, M.Y.A. Rahman, page 711,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.711

Effect of Hydrogen on the Stress Relaxation of Aged NiTi Shape Memory Alloys
W. Elkhal Letaief, T. Hassine, F. Gamaoun, page 714,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.714

Investigation of the Crystallization Kinetics in Ge-Sb-Te-Bi Thin Films for Phase Change Memory Application
A.V. Babich, A.A. Sherchenkov, S.A. Kozyukhin, S.P. Timoshenkov, page 717,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.717

Investigation of Shot Noise in Avalanche Photodiodes
F. Kocak, A. Kilic, I. Tapan, page 721,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.721

An Investigation on the Mass Attenuation Coefficients of W-VC-C and W-VC-TiC-C Composites for Gamma Radioisotopes
A.B. Tuğrul, E. Demir, O. Yılmaz, S. Sönmez, M.L. Öveçoğlu, B.Büyük, page 724,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.724

Biological Evaluation of Anodized Biodegradable Magnesium-Calcium Alloys
J.H. Kim, J.Y. Lee, K.M. Lee, S.W. Park, H.P. Lim, C. Park, J.C. Bae, K.D. Yun, page 728,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.728

Evaluation of Surface Characteristics and Physical Properties on Biodegradable Magnesium-Calcium Alloys by Anodic Oxidation
J.H. Kim, J.Y. Lee, H.S. Yang, S.W. Park, H.P. Lim, G.J. Oh, K.D. Yun, page 736,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.736

Improvement of Corrosion Properties for AL-4.08MG Alloy in Seawater by Two Step Anodizing in Electrolyte with Varied Concentration
S.J. Lee, M.S. Han, S.J. Kim, page 742,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.742

Time and Temperature Dependent Damage Characteristics of 5083-O Al Alloy under Cavitation-Corrosion Condition
S.J. Lee, M.S. Han, J.Y. Jeong, M.J. Kim, S.J. Kim, page 747,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.747

Influence of Applied Frequency on Microstructural and Electrochemical Characteristics of Ceramic Coating Produced on Al-Mg Alloy by Pulsed Plasma Electrolytic Oxidation
J.H. Lee, S.J. Lee, S.J. Kim, page 753,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.753

Morphological Differences and Their Effects on the Mechanical Properties of Titanium Oxides Thin Film Obtained via Anodization Process
N. Sarıca, Z.Z. Öztürk, C. Bindal, A.H. Üçışık, page 759,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.759

The Prediction and Optimization of the Effects of Abrasive Waterjet Cutting Parameters On Kerf
M. Ay, İ. Ay, page 762,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.762

Electrical Characteristics and Temperature Dependence of Photovoltaic Parameters of GaInAsSb Based TPV Diode
B. Kucur, M. Ahmetoglu, I.A. Andreev, E.V. Kunitsyna, M.P. Mikhailova, Y.P. Yakovlev, page 767,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.767

Determination of the Tenth and Half Value Layer Thickness of Concretes with Different Densities
A. Akkaş, page 770,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.770

Electrodeposition and Characterization of Co/Cu Multilayers
M. Haciismailoglu, M. Alper, H. Kockar, O. Karaagac, page 773,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.773

Technology of Thin Film Fabrication on Porous Metal Oxide Substrates
Yu.I. Shtern, M.Yu. Shtern, R.E. Mironov, A.A. Sherchenkov, M.S.Rogachev, page 776,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.776

Intellectual Precise Temperature Sensor with Wireless Interface
M.Yu. Shtern, Ya.S. Kozhevnikov, Yu.I. Shtern, R.E. Mironov, I.S. Karavaev, M.S. Rogachev, page 779,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.779

Intellectual System for Controlling the Individual Heat Consumption
R.E. Mironov, Yu.I. Shtern, Ya.S. Kozhevnikov, M.Yu. Shtern, I.S. Karavaev, page 782,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.782

Technology and Investigation of Ohmic Contacts to Thermoelectric Materials
Y.I. Shtern, R.E. Mironov, M.Y. Shtern, A.A. Sherchenkov, M.S. Rogachev, page 785,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.785

Effect of Copper Addition on Pitting Corrosion of MA-Al
B. Aranda, F.G. Cuevas, J. Cintas, M. Herrera-Garcí, P. Urban, page 788,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.788

Consequences of Unit Cell Design in Metamaterial Perfect Absorbers
F. Bagci, B. Akaoglu, page 792,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.792

The NO2 Sensing Properties of the Sensors Done with Nano-Tetrapods
F.R. Tulun, S. Öztürk, Z.Z. Öztürk, page 797,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.797

Time-Reversal Invariant Topological Superconductivity in Quasi-One-Dimensional Structures
S. Mammadova, E. Nakhmedov, O. Alekperov, page 800,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.800

Raman Studies of ZnO Products Synthesized by Solution Based Methods
D. Gültekin, H. Akbulut, page 803,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.803

Intermolecular Magnetic Spin-Spin Interaction in Asphaltene Suspensions at 1.53 mT
H. Ovalioglu, H.E. Kirimli, C. Akay, page 806,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.806

A Study on Performance Effects of Standard and Stabilized He-Ne Lasers in an Interferometric Measurement System
V.G. Böcekçi, page 810,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.810

Gamma Attenuation Properties of Some Aluminum Alloys
S. Yıldırım, A.B. Tugrul, B. Buyuk, E. Demir, page 813,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.813

Electrical Conductivity, Viscosity and Thermal Properties of TEGDME-Based Composite Electrolytes for Lithium-Air Batteries
M. Kartal, A. Alp, H. Akbulut, page 816,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.816

Modeling the Nonlinear Dynamics of Nanotube Cores Driven by Interlayer Dispersion Force Modulation: New Developments and Future Applications
F. Pinto, page 819,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.819

Video on Demand Over Optical Wireless Communication Links
M. Siraj, M.I. Memon, M.S. Khan, page 826,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.826

Investigation of Shielding Performance of Concretes Produced with Iron Fillings Using Betatron X-Ray Radiography
O. Ozyurt, N. Altinsoy, B. Buyuk, E. Fenerci, page 829,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.829

Radio Frequency Generator Using Four Wave Mixing in Cascaded Nonlinear Semiconductor Optical Amplifiers
M.I. Memon, M. Siraj, H. Fathallah, M.S. Khan, page 832,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.832

Biodegradation Properties of Poly (Lactic) Acid Reinforced by Kenaf Fibers
S.N. Surip, W.N.R. Wan Jaafar, N.N Azmi, N.A Hassan, page 835,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.835

The Comparative Study of the Structure and Phase Composition of Ni-Based Coatings Modified by Plasma Jet or Electron Beam
D. Alontseva, A. Russakova, A. Krasavin, page 838,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.838

Synthesis of SiO2 Nanostructures Using Sol-Gel Method
H.N. Azlina, J.N. Hasnidawani, H. Norita, S.N. Surip, page 842,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.842

On Gibbs Measures of the Potts Model with Three Competing Interactions on Cayley Tree of Order 3
H. Akin, H. Saygılı, page 845,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.845

Preparation and Characterization of Surfactant-Modified Powder Activated Carbon (SM-PAC) Reinforced Poly (Ethylene Oxide) (PEO) Composites
A. Gürses, M. Ejder-Korucu, Ç. Doğar, page 849,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.849

Synthesis and Thermal and Textural Characterization of Aniline Formaldehyde-Organoclay Composites
A. Gürses, Z. Eroğlu, K. Güneş, Ç. Doğar, page 853,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.853

Enhanced Corrosion Resistance of Silicone-Coated Stents by Plasma Treatment
H.B. Kim, K.Y. Baik, M.H. Moon, C.K. Sung, page 857,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.857

Existence of p-Adic Quasi Gibbs Measures for Mixed Type p-Adic Ising λ-Model
H. Akin, M. Dogan, F. Mukhamedov, page 861,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.861

Future Expectation of the Photovoltaics Role in Compensating Energy Demand
Z. Er, I.B. Turna, page 865,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.865

Investigation on Magnetic Properties of Soft/Hard Magnetic Bilayers at Different Temperatures: a Monte-Carlo Study
C. Değer, M.E. Aköz, M. Erkovan, F. Yıldız, page 869,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.869

Antibacterial Properties of Sol-Gel Derived TiO2 Nanoparticles
B. Duymaz, Z.V. Yigit, M.G. Şeker, F. Dündar, page 872,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.872

Structure, Morphology, and Band Gap of Ti-V-O Mixed Oxides Processed by Coprecipitation and Calcination
M.W. Park, Y.S. Lim, Y.M. Sung, D.J. Kwak, J.S. Lee, page 875,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.875

Determination of Radiation Shielding Properties of Cotton Polyester Blend Fabric Coated with Different Barite Rate
S. Kilincarslan, I. Akkurt, I.S. Uncu, F. Akarslan, page 878,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.878

Fabrication and Characterisation of Bronze Pads and Comparison with Commercial Bronze Pads
A. Demir, page 880,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.880

Evaluation of Biodegradable Fixation System for Mandibular Angulus Fracture by Using Finite Element Method
M. Ay, S. Hartomacioglu, B. Bakircioglu, H.E. Yuzbasioglu, T. Kubat, page 883,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.883

Optimization of Effects of Pocket Tool Path Strategies and Cutting Parameters on Surface Quality
A. Etyemez, page 886,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.129.886