Preface
Full Text PDF

Controlled Surface Modification of CNTs using Mild Acids through Powerful Sonication Technique
D.S. Ahmed, A.L. Abed, page 7  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.7

Finite Element Analysis of the Model of Mechanical Behavior of SUS420 Steel Scraping Blade in Printing Engineering
Ö. Karaçali, page 10  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.10

Vibration Analysis of Layered Composite Beam with Variable Section in Terms of Delamination and Orientation Angle in Analytical and Numerical Methods
G. Atlihan, B. Ergene, page 13  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.13

Production Performance of Wood Flour Reinforced Polymer Composites in Extrusion Process
A. Vanli, A. Akdogan, page 18  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.18

Thermodynamical Analysis of a Two Stage Mixing Chamber R-717 Refrigeration Cycle
H.C. Bayrakç i, S. Çekin, page 21  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.21

The Grey-Based Taguchi Method: Optimization of Milling of Mold Steel
G. Basmac i, M. Ay, A. Etyemez, page 24  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.24

Optimization of the Effects of Machining Parameters in Turning on Hastelloy C22 Composition through Taguchi Response Surface Methodology
G. Basmacı, M. Kurt, M. Ay, B. Barkın, page 28  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.28

Process Optimization and Surface Modification of Die Casting AZ91 Magnesium Alloy Products
A.S. Vanli, A. Akdogan, M.N. Durakbasa, page 32  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.32

Titanium-304L Stainless Steel Joining by Powder Metallurgical Uniaxial Pressing under Vacuum Conditions
M. Telli, R. Yamanoglu, H. Sanlı, page 37  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.37

Development of Super-Pure (7N⁺) Liquid Gallium Analytical Sample Preparation for GDMS Analysis
E. Kutelia, G. Kvinikadze, page 41  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.41

Precipitation and Dissolution Kinetics of GP Zones and Metastable Phase in Al-3wt.%Cu Alloy
B. Khamel, F. Sahnoune, N. Brihi, M. Fatmi, page 45  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.45

Tool Stresses in Soft and Hard Finish Turning with Low Content CBN Tool by Finite Elements Analysis
B. Yalçın, N. Yılmaz, A. Kurt, page 48  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.48

Fe₂O₃/Y₂O₃ Catalyst Supported on Alumina and Halloysite
M. Karaismailoglu, H. Figen, S. Baykara, page 57  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.57

Cyclic Oxidation Behavior of c-BN and h-BN at Elevated Temperatures
İ. Özkan, E. Dokumacı, A.B. Önay, page 61  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.61

Grain Size and Grain Boundary Analysis of Aluminum Compacts with/without 10 wt.% of Nickel Powder Processed by Equal Channel Angular Pressing
Ü. Demir, S. Aksöz, A. Güral, page 64  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.64

Resistive Switching Behaviour in PMMA/Al:ZnO Composite Films
S. Vallabhapurapu, L.D. Varma Sangani, M. Ghanashyam Krishna, J. Das, C. Tu, S. Du, A. Srinivasan, page 68  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.68

Synthesis and Thermal Behavior of Cordierite Ceramics from Algerian Kaolin and Magnesium Oxide
D. Redaoui, F. Sahnoune, A. Ouali, N. Saheb, page 71  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.71

Effect of B₂O₃ on Phase Transformation of Cordierite Synthesized from Algerian Kaolin and MgO
D. Redaoui, F. Sahnoune, M. Heraiz, page 75  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.75

Thermal Dehydroxylation Kinetics of Algerian Halloysite by Differential Thermal Analysis
A. Raghdi, M. Heraiz, F. Sahnoune, A. Ouali, D. Redaoui, page 79  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.79

New Plasticized Polymer Solid Electrolyte Material for Zn/MnO₂ Cell
Z. Gharnout, L. Telli, A. Merrouche, S. Walter, page 82  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.82

Thermal Transformation of Fired Clay Ceramics by Dilatometric Analysis
L. Beddiar, F. Sahnoune, M. Heraiz, D. Redaoui, page 86  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.86

Vibrational Power Harvester Based on Lithium Niobate Bidomain Plate
I. Kubasov, A. Kislyuk, M. Malinkovich, A. Temirov, S. Ksenich, D. Kiselev, A. Bykov, Y. Parkhomenko, page 90  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.90

Microstructural Evolution and Wear Behavior of HVOF Spraying WC/Co Coatings Produced by Laser Cladding
G. Lian, M. Jean, page 93  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.93

Constrictions Fabricated on YBCO Thin Film using the Femtosecond Laser: Limiting Factors
P.O. Umenne, V.V. Srinivasu, page 100  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.100

Electrochemical Corrosion of Pb-Sn and Pb-Sb Alloys for Lead-Acid Battery Applications
Z. Bakour, A. Dakhouche, page 103  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.103

A Novel Vibration Sensor Based on Bidomain Lithium Niobate Crystal
I. Kubasov, A. Kislyuk, M. Malinkovich, A. Temirov, S. Ksenich, D. Kiselev, A. Bykov, Y. Parkhomenko, page 106  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.106

Design of a New Energy Absorber Based on the Coulomb Friction to Protect Structures Against Impact Loads
D. Karayel, G. Atali, S. Ozkan, page 109  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.109

Synthesis of B₄C-SiC in-Situ Composite Powders through Carbothermic Reactions
F. Çalışkan, E. Kocaman, T. Tehçi, page 113  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.113

Effect of Irradiation and Temperature on Microstructural Characteristic of FeCrAl Alloys
I. Voiculescu, V. Geanta, E.M. Stanciu, D.A. Jianu, C. Postolache, V. Fugaru, page 116  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.116

Ions Passage Through Nanodroplets in a Multicomponent Beam
I. Hasanov, I. Gurbanov, E. Akbarov, page 119  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.119

Ionic Conductivity of Ce_0.9-xGd_0.1Sm_xO_2-δ co-doped Ceria Electrolytes
A. Arabacı, M.F. Öksüzömer, page 122  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.122

Optimization of Effects of Cutting Parameters and Cutting Tool Path by using Grey Based Taguchi Method
M. Ay, A. Etyemez, page 125  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.125

The Swelling Behaviors of poly(2-acrylamido-2-methyl-1-propane sulfonic acid co-1-vinyl-2-pyrrolidone) Hydrogels
S. Çavuş, E. Çakal, page 129  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.129

Effect of Alternating Magnetic Field on the Growth of Different Strains of Bacteria in the Presence of Iron Oxide Nanoparticles
M-Ali H. Al-Akhras, B. Albiss, M.K. Qaseer, R. Alkhatib, M.A. Al-Ghbari, Q. Mohaidat, page 133  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.133

The Influence of the Viscoelasticity on the Axisymmetric Wave Attenuation in a bi-Material Solid Cylinder
T. Kocal, S.D. Akbarov, page 135  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.135

Effect of Variation of Zinc Content and Sintering Temperature on Structural Properties of Some Ferrite Materials
A.I. Abd, A.L. Abed, D.S. Ahmed, page 139  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.139

The Influence of Annealing on Microstructure and Microhardness of Twin-roll Cast Al-Mg-Sc-Zr Alloy
M. Cieslar, J. Bajer, M. Šlapáková, B. Křivská, M. Zimina, M. Stolbchenko, O. Grydin, page 145  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.145

Numerical Optimization of the Blade Surface Geometry in a Wave Turbine System
G. Ozdamar, Y. Pekbey, page 150  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.150

A Numerical Study of the Effect of Wave Amplitude on the Efficiency of a Wave Power System
G. Ozdamar, Y. Pekbey, A. Ozdamar, page 153  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.153

Numerical Comparison of the Effect of Blade Material on Wind Turbine Efficiency
G. Ozdamar, M. Mertcan, A. Ozdamar, page 156  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.156

Nanoclay and Temperature Effects on Carbon/Fiberglass Composite Laminates under Impact Loading
H.Y. Unal, G. Oner, Y. Pekbey, page 159  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.159

Mechanical Performance of Hybrid Carbon/Fiberglass Composite Laminates Reinforced with Nanoclay
G. Oner, H.Y. Unal, Y. Pekbey, page 164  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.164

Determination of the Lifetime in As Doped a-Se from Transient Photocurrents using Laplace Transform Technique
F. Serdouk, M. Benkhedir, page 168  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.168

Competitive Adsorption of Heavy Metals from Water using Pumice Supported Nano Scale Zero-Valent Iron
B.I. Harman, N.S. Ibrahim, page 171  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.171

Transition Radiation of Charged Particle in the Modulated Anisotropic Magnetodielectric Filling of the Waveguide
E. Gevorkyan, page 174  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.174

New Aspects of Microwave Absorption in Ferromagnetic Ni-Mn-Sn Thin Films
A. Srinivasan, R. Modak, C. Swapna, V.V. Srinivasu, page 178  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.178

Optimization of Electrophoretic Deposition of YSZ
K.O. Oskay, B. Demirel, page 182  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.182

An Oxidation Study of NiCoCrAl Coatings Produced by Electrolytic co-Deposition Method
K.O. Oskay, B. Demirel, page 186  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.186

Comparative Analysis of Ship Lighting Systems in Terms of Economic, Environmental and Material Performance
K. Yiğit, G. Kökkülünk, Ö. Savaş, page 189  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.189

Microstructure and Tribocorrosion Properties of Pulsed Plasma Nitrided Cast CoCr Alloy for Dental Implant Applications
F. Mindivan, H. Mindivan, page 192  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.192

Effect of Compatibilizer on Morphology, Thermal and Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropylene Composites
L. Altay, Y. Seki, K. Sever, I. Sen, T. Uysalman, M. Atagur, O. Seydibeyoglu, M. Sarikanat, page 196  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.196

Thermal, Electrical, and Mechanical Properties of Various Thermal Conductive Powder Filled Polyamide 6 Composite Materials for Thermal Management Applications
L. Altay, Y. Seki, K. Sever, I. Sen, T. Uysalman, M. Atagur, M. Sarikanat, page 200  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.200

Localization of Mobile Robot using Odometry, Camera Images and Extended Kalman Filter
G. Atali, Z. Garip, D. Karayel, S.S. Ozkan, page 204  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.204

Effect of Polyethylene Glycol on the Mechanical Alloying Behavior of Cu-W Electrical Contact Material
S. Biyik, page 208  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.208

New Kinetic Theory and New Equations for Lattice and Electronic Heat Capacities, Enthalpies and Entropies of Solids: Application to Tungsten
A. Bozdoğan, page 213  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.213

Stability of Colloidal Silver Nonoparticle Solutions Prepared by Chemical Reduction
H. Al-Khateeb, F. Alzoubi, M. Alqadi, M. Mohammed, page 217  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.217

Durability Analyses of a Rubber to Metal Anti-vibration Cone Mount, Subjected to a Random Type Load Signal by using Damage Models in Finite Element Method
A.K. Serbest, M. Yazıcı, page 222  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.222

Effect of K Partial Substitution on the Mechanical Properties of Bi-2223 Superconductors
M. Abbas, H. Dehi, page 227  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.227

Polymer Foam Core Aluminum Sandwich Lightweight Car Hood for Pedestrian Protection
Y. Can, M. Yazıcı, H. Güçlü, page 231  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.231

Welding Time Effect on Nugget Sizes in Resistance Spot Welding of SPA-C Steel Sheets used in Railway Vehicles
N. Akkaş, V. Onar, Ç. Teke, E. İlhan, S. Aslanlar, page 235  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.235

Investigation of the Hyperelastic Material Coated Steel Car Hood Concerning Pedestrian Head Impact Protection using Finite Element Method
M. Yazıcı, Y. Can, H. Güçlü, page 238  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.238

CFD Heat Pipe Simulation of Mass Transfer in NH₃-Water Nanofluid Flow
Y. Çay, T.N. Mortaş, F. Çalışkan, page 241  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.241

Experimental Study of Flexural Performance of Reinforced Concrete Beams and Hybrid Beams
F. Aydın, A. Sarıbıyık, M. Sarıbıyık, M. Ipek, page 244  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.244

Investigation of Ceramic Coating by Thermal Spray with Diffusion of Copper
M. Mohammed, Sh. Zaidan, H. Smich, page 248  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.248

Investigation Effect of Different Feldspar Ratio on the Mechanical Properties of Porcelain Ceramic Foam Prepared by Polymeric Sponge Method
M. Mohammed, S. Shahatha, page 252  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.252

The Utilisability of Ground Hazelnut Shell as Filler in Polypropylene Composites
H. Demirer, İ. Kartal, A. Yıldırım, K. Büyükkaya, page 254  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.254

Investigation of Mechanical and Thermal Properties of Waste EPDM and Polypropylene Mixtures
H. Demirer, İ. Kartal, K. Ünlü, K. Büyükkaya, page 257  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.257

Optimization of Machining Parameters for the Turning Process of AISI 316 L Stainless Steel and Taguchi Design
G. Basmaci, page 260  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.260

Electromagnetic Shielding Effectiveness of Mineral Doped Waste Paper Fiber
A. Çifci, A.İ Kaya, page 265  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.265

Performance of Free Space Optical Terrestrial Link under Dense Fog Conditions
S.M. Yasir, M.S. Khan, A. Wahid, M.T. Mushtaq, M.I. Memon, M. Siraj, M.S. Iqbal, page 268  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.268

Tribological Behavior of Borided Ti6Al4V Alloy under Simulated Body Fluid Conditions
Y. Kaplan, A. Işıtan, page 271  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.271

Analysis of Internal Design Parameters to Minimize Geometrical Losses in Free-Space Optical Communication Link
M.T. Mushtaq, S.M. Yasir, M.S. Khan, A. Wahid, M.S. Iqbal, page 275  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.275

Powder Metallurgy Processing of Ti-Nb Based Biomedical Alloys
E. Yilmaz, A. Gökçe, F. Findik, H.Ö Gülsoy, page 278  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.278

Effect of Diatomite Weight Fraction on Morphology, Thermal and Physical Properties of Diatomite Filled High Density Polyethylene Composites
K. Sever, M. Atagur, L. Altay, Y. Seki, T. Uysalman, I. Sen, N. Kaya, A. Guven, M. Sarikanat, page 281  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.281

Experimental Investigation of Fatigue and Mechanical Properties of Unidirectional Composite Plates Filled Nanoparticles
B. Dindar, N. Bektaş, page 285  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.285

Development of High Purity, Few-Layer Graphene Synthesis by Electric Arc Discharge Technique
U. Cotul, E.D.S. Parmak, C. Kaykilarli, O. Saray, O. Colak, D. Uzunsoy, page 289  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.289

Numerical Modeling of Torch Design for Plasma Atomization
E. Yurtkuran, R. Unal, A. Ozsunar, page 292  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.292

The Effects of Nanoclay on Mechanical Properties of High Density Polyethylene and Polypropylene Materials
E. Akdoğan, N.B. Bektaş, page 297  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.297

Dismantling of the VVR-S Nuclear Research Reactor Vessels
R. Deju, D. Gurau, A. Zorliu, M. Mincu, page 300  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.300

Examination of Nonlinear Distortion of IT Power Supplies in Low Voltage Grid from the Current Quality Point of View
V. Szücs, A. Fodor, A. Göllei, P. Görbe, page 307  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.307

Technical Methodology to Evaluate the Decommissioning of the Contaminated Underground Structures Belonging to the VVR-S Nuclear Research Reactor
I. Iorga, R. Deju, A.O. Pavelescu, D. Gurau, page 311  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.311

Investigation of the Microstructure and Chemical Composition of CaCu₃Ti₄O₁₂ Multilayer Elements using SEM, EDS, and XPS
A. Skwarek, R.P. Socha, D. Szwagierczak, P. Zachariasz, page 318  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.318

Microstructure Characterization of LTCC Glass-Ceramic Composites with Various Degree of the Introduced Porosity
B. Synkiewicz, D. Szwagierczak, J. Ratajczak, A. Czerwiński, page 322  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.322

Low Field Microwave Absorption in Mn:Ni Co-Doped ZnO μm Size Powders
T.S. Mahule, J. Das, D.R. Sahu, V.V. Srinivasu, page 326  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.326

Comparison of Photodetector Performances in a Color Filtered Spectrophotometer
V. Bocekci, H. Korkmaz, page 329  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.329

Fabrication of Alumina Ceramic Filters and Performance Tests for Aluminium Castings
A. Demir, page 332  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.332

Design of Microcontroller Controlled YAG Laser Device Cooling System using Thermoelectric Materials
M. Yagci, page 335  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.335

The Effects of Drilling Operation on the Surface Roughness of Modified GFRP Composites
I. Cavusoglu, M.N. Durakbasa, M. Cakir, page 339  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.339

Acoustic Parameters as Criteria of Localized Deformation in Aluminum Alloys
A. Lunev, M. Nadezhkin, S. Barannikova, L. Zuev, page 342  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.342

Obtaining the Sky-Temperature Dependence on Voltage Value by the Passive Millimeter Wave Imaging System
M. Duman, A. Salman, page 346  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.346

Dry Sliding Wear Behaviour of Shot Peened TI6AL4V Alloys at Different Peening Times
Y. Yıldıran Avcu, O. Yetik, H. Koçoğlu, E. Avcu, T. Sınmazçelik, page 349  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.349

Experimental Investigation of the Effects of Parameters on CO₂ and CO Emissions during FCAW of Structural Steel. Large Estimation and Evaluation of Environmental and Health Impacts
T. Mert, L. Bilgili, U.B. Celebi, S. Ekinci, page 354  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.354

A DFT Study of the Electronic and Optical Properties of Kesterite Phase of Cu₂ZnGeS₄ using GGA, TB-mBJ, and U Exchange Correlation Potentials
M. Mesbahi, F. Serdouk, M. Benkhedir, page 358  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.358

Influence of Current Intensity and Shielding Gas in GMAW of DH36 Grade High Strength Steel
M. Ekici, U. Özsaraçç, S. Aslanlar, page 362  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.362

Forming Behavior of ABS and PC Polymers under Plastic Injection Molding Process
O. Kamber, page 365  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.365

Surface Cleaning of Metals Using Low Power Fiber Lasers
E. Kayahan, L. Candan, M. Aras, O. Gundogdu, page 371  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.371

Developing a New Resource and Energy Saving Technology of Precision Application of Powder Coating Multifunctional Systems
D. Alontseva, E. Ghassemieh, A. Russakova, A. Krassavin, N. Prokhorenkova, page 374  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.374

Soda Lime Silicate Glass Tube-Titanium Inset Joining by O₂/Propane Flame Work in Air
M. Telli, page 379  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.379

Microbial Ability to Colonize Mural Painting and Its Substrate
I. Gomoiu, R.L. Cojoc, M.I. Enache, S.E. Neagu, D. Mohanu, I. Mohanu, page 383  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.383

Combustion Simulation of Direct Injection CI Engine Operating on Dual Fuel Using CFD
O. Ghazal, page 387  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.387

The Cloudless Effect Evaluation for Hourly Irradiance in Turkey
Z. Er, O. Derici, I. Turna, B. Karatas, M. Eroglu, E. Alyanak, page 391  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.391

Mechanical Analysis of a 1.2 MW - 40 m Long Horizontal Axis Composite Material Wind Turbine Blade by S-N Fatigue Cycle and Goodman Diagrams in Windpower Engineering
Ö. Karaçalı, page 394  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.394

Nanoporous Tungsten for Improved Mechanical Performance and Safety in Nuclear Control Rod Cladding
G. Garner, C.D. Fincher, M.T. Demirkan, T. Karabacak, T. Ozkan, A.A. Polycarpou, page 397  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.397

Mechanical Properties of Nanoporous Si Anodes using a Continuum Mechanical Model
C.D. Fincher, T. Ozkan, H. Kim, M.T. Demirkan, T. Karabacak, A.A. Polycarpou, page 401  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.401

Siloxane-Based Nanocomposites Containing ⁶LiF Nanocrystals for Thermal Neutrons Detection
S.M. Carturan, M. Degerlier, G. Maggioni, T. Marchi, F. Gramegna, M. Cinausero, L. Stevanato, M. Vesco, A. Quaranta, page 405  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.405

Investigation of Titanium Material Deformation for Positioning Stereotactic Navigation System by von Mises Stress Criteria and Finite Element in Engineering
Ö. Karaçalı, page 409  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.409

Coatings of Bioactive TiO₂ Films on TI6AL4V Alloy by Micro Arc Oxidation
A. Ayday, page 412  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.412

Investigations of Ti Binary Alloys Manufactured by Powder Metallurgy for Biomaterial Applications
H.Y. Atay, M.H. Rodríguez, A.A. Mata, A.V. Escuder, V.A. Borrás, page 415  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.415

Investigation of Image Analysis in the Characterization of Electrospun Polycaprolactone/Graphene Oxide/Fe₃O₄ Nanocomposites
O. Demir, V.G. Bocekci, O. Gunduz, page 419  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.419

Computer Aided Detection of Dental Implant Crown Defects
V. Böcekçi, Ö. Demir, page 422  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.422

The Effects of Natural Antioxidant on the Efficiency of Lubricant Oil
T. Talib Issa Al-Omran, page 426  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.426

Tribological Behaviors of DLC Films and their Application in Micro-Deep Drawability
M.D. Jean, G.F. Lian, B.S. Chen, page 429  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.429

Charge Transfer at Hybrid Organic-Inorganic Interface
A. ur Rehman, H.J. Zhang, W. Peng, A. Razaq, K. Ibrahim, S.N. Bao, page 434  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.434

Revealing the Distribution and Bioavailability of Zn, Pb, and Cd in Soil at an Abandoned Zn Processing Site: The Role of Spectrometry Techniques
K. Sutkowska, L. Teper, A. Vaněk, T. Czech, page 438  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.438

Effect of Screw Speed, Drawing Ratio and PET Concentration on the Properties of PET/PP Blends
I. Gokgoz Erkoc, T. Guven, F. Yildirim, M. Sözer, F. Güner, page 442  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.442

Estimation of Ambient Turbulence Intensity over Complex Terrain
T. Kara, H. Yazicioglu, M. Ozbek, K.M.M. Tunc, page 447  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.447

Determination of Ambient Turbulence Intensities for Stratified Atmospheric Flow
H. Yazicioglu, T. Kara, M. Ozbek, page 451  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.451

Reversibility Algorithm for 2D Cellular Automata with Reflective Condition
S. Redjepov, E. Acar, S. Uguz, page 454  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.454

Development of Some Electrical Properties of Composites Polymer Based on Nano Copper Particles
T.T. Issa, A.A. Mohammed, Z.E. Abaas, F.S. Shokr, page 457  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.457

The Effects of B₂O₃ Addition on the Properties of Anorthite Prepared from Algerian Kaolin
A. Mokhtari, H. Belhouchet, F. Sahnoune, page 460  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.134.460