Acta Physica Polonica A
Vol. 131 No. 3 March 2017
Special Issue of the 6th International Congress & Exhibition Advances in Applied Physics and Materials Science (APMAS2016), part II
Maslak, Istanbul, Turkey, June 1-3, 2016

Full Text PDF

High Energy Ball Milling of YAG Powders: Sintering Properties and Microstructural Evaluation
A. Ozer, O.B. Kilic, page 329,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.329

Study of the Physical Properties of Cobalt/Cobalt Oxide Particles Synthesized by Pulsed Laser Ablation in Different Liquid Media
S.M. Borghei, F. Bakhtiyari, page 332,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.332

Intermolecular Effects of Fluorocarbons on MC800 Asphaltene and their Characterization
H.E. Kirimli, H. Ovalioglu, C. Akay, page 336,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.336

Fabrication and Arc-Erosion Behavior of Ag8SnO2 Electrical Contact Materials under Inductive Loads
S. Biyik, M. Aydin, page 339,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.339

Degradation of Polyvinylpyrrolidone by Solution Plasma Process
A. Akyüz, M. Özkan, page 343,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.343

Influence of Vanadium on the Corrosion Behavior of High Manganese Steel in 0.5 M H2SO4 Solution
A. Gharbi, H. Maouche, O. Ghelloudj, page 346,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.346

Optimisation of Machining Parameters in Turning AISI 304L Stainless Steel by the Grey-Based Taguchi Method
M. Ay, page 349,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.349

Optimization of Cutting Parameters, Condition and Geometry in Turning AISI 316L Stainless Steel Using the Grey-Based Taguchi Method
G. Basmaci, M. Ay, page 354,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.354

Effect of the Inclination of Mold Walls on Primary Cooling During the Continuous Casting of Steel
M. Bourebia, M. Chaour, A. Lemoui, L. Laouar, page 359,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.359

Effects of the Wind Speed and the Material Emplacement on the Output Signal of PZT Piezoelectric Energy Harvester
F. Demir, M. Anutgan, page 362,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.362

Magnetic Properties of La3Ga5.5Ta0.5O14 Single Crystals Doped with Sm3+ and Er3+ Ions
S.M. Kaczmarek, G. Leniec, M. Berkowski, S. Kazan, M. Acikgoz, page 366,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.366

Determination of Feederless Casting Limits by Thermal Analysis in Cast Iron
S.O. Erturk, L.C. Kumruoglu, A. Ozel, page 370,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.370

The Cathodic Electrolytic Plasma Hardening of Steel and Cast Iron Based Automotive Camshafts
A. Dayanç, B. Karaca, L.C. Kumruoğlu, page 374,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.374

pH Dependent Degradation and Characterization of Geopolymer Structures Derived from Fly Ash
K. Şahbudak, page 379,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.379

Thermal Decomposition Kinetics of Algerian Tamazarte Kaolin by Differential Thermal Analysis (DTA)
F. Sahnoune, M. Heraiz, H. Belhouchet, N. Saheb, D. Redaoui, page 382,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.382

Synthesis of Nickel-Doped TiO2 Thin Films and Their Structural and Optical Properties at Different Annealing Temperatures
A. Hojabri, M. Adavi, F. Hajakbari, page 386,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.386

Welding Time Effect of Welding Joints in Micro Alloyed and TRIP 800 Steels in Resistance Spot Welding
V. Onar, S. Aslanlar, page 389,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.389

Characterization of Cu/Ag/Eu/Hydroxyapatite Composites Produced by Wet Chemical Precipitation
B. Komur, E.R. Ozturk, N. Ekren, A.T. Inan, O. Gunduz, E. Andronescu, A. Ficai, F.N. Oktar, page 392,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.392

Physical Characterization of Turbot (Psetta Maxima) Originated Natural Hydroxyapatite
A.T. Inan, B. Komur, N. Ekren, M.O. Aydogdu, H. Gokce, A. Ficai, S. Salman, F.N. Oktar, O. Gunduz, page 397,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.397

Hydroxyapatite Synthesis from Fish Bones: Atlantic Salmon (Salmon Salar)
B. Komur, E. Altun, M.O. Aydogdu, D. Bilgiç, H. Gokce, N. Ekren, S. Salman, A. T. Inan, F.N. Oktar, O. Gunduz, page 400,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.400

Prediction of Inner Grooved Circular Jet Flow with Artificial Neural Networks
A.T. Inan, page 403,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.403

Optoelectronic, Elastic and Thermal Properties of Cubic Perovskite-Type SrThO3
Y. Benaissa Cherif, M. Rouaighia, A. Zaoui, A. Boukortt, page 406,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.406

Soda Lime Silicate Glass-to-Titanium Joining by Controlled Heat Treatments in Air
M.B. Telli, page 414,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.414

Nanocrystalline Nickel Oxide (NiO) Thin Films Grown on Quartz Substrates: Influence Of Annealing Temperatures
F. Hajakbari, M. Taheri Afzali, A. Hojabri, page 417,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.417

Reliability of the High Strength Pipeline Steel under Corrosion Defect
O. Ghelloudj, D. Zelmati, A. Gharbi, D. Berdjane, C.D. Ramoul, T. Chouchane, page 420,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.420

Analysis of Surface Modification of GFRP and Influence on the Drilled Part Delamination
I. Cavusoglu, M.N. Durakbasa, M. Cakir, page 423,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.423

Preparation, Characterization, Mechanical Properties and Electrical Conductivity Assessment of Novel Polycaprolactone/Multi-Wall Carbon Nanotubes Nanocomposites for Myocardial Tissue Engineering
S. Ghaziof, M. Mehdikhani-Nahrkhalaji, page 428,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.428

Characterization of 2D Hybrid Cellular Automata with Periodic Boundary
E. Acar, S. Uguz, H. Akin, page 432,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.432

Fabrication of Functional Graded Al2124 Composite Reinforced with Al2O3 Particles
F. Çalışkan, S. Cömert, E. Kocaman, page 437,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.437

Deformations and Tensile Fracture of Carbon Nanotubes Based on the Numerical Homogenization
M. Chwał, page 440,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.440

Investigation of Mechanical Properties of Fe-Based Metal Matrix Composites by Warm Compaction for Gear Production
T. Gun, M. Simsir, page 443,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.443

The Effects of Austempering and Induction Hardening on the Wear Properties of Camshaft Made of Ductile Cast Iron
B. Karaca, M. Şımşır, page 448,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.448

La-Based Material for Energy Storage Applications
F.E. Atalay, H. Kaya, A. Bingol, D. Asma, page 453,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.453

Explicit Analysis of Cyclic Fatigue Behavior of Poplar Wood Pallet by Computational Engineering --- Von Mises Yield, Goodmen and N-S Diagram Approach
Ö. Karaçalı, page 457,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.457

Fabrication of Transparent Yttria Ceramics by Spark Plasma Sintering
E. Korkmaz, F. Sahin, page 460,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.460

Evaluation of Friction Coefficient and Adhesion Properties of Silicon Carbon Nitride Films Prepared by HWCVD
T. Yamada, T. Iseda, Y. Kadotani, A. Izumi, page 463,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.463

Effect of Copper Addition to Aluminium Alloys on Surface Roughness in Terms of Turning Operation
F. Özen, F. Fıçıcı, M. Dündar, M. Çolak, page 467,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.467

Enhanced Mechanical Performance of Aluminum Glass Fiber Reinforced Foam Material by Cu Modification
A.T. Ertürk, I. Aydın, page 470,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.470

MoOx Doped Single-Walled Carbon Nanotube Films as Hole Transport Layer for Organic Solar Cells
F. Çolak, Z. Dalkılıç, A. Tabatabaei, R. Atlıbatur, Ü. Çolak, E. Arıcı, N. Karatepe, page 474,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.474

Vibration Noise Harshness of a Light Truck Driveshaft, Analysis and Improvement with Six Sigma Approach
A.T. Ertürk, S. Karabay, K. Baynal, T. Korkut, page 477,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.477

Olivine Particle Reinforced Polyphenylene Sulfide Matrix Composites
A.E. Sahin, T. Sinmazcelik, page 481,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.481

A Different Flow Field Design Approach for Performance Improvement of a PEMFC
H. Kahraman, C. Haşimoğlu, İ. Çevik, A. Murcak, page 484,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.484

Effect of Severe Plastic Deformation on Wear Properties of Aluminum Matrix Composites
I. Karademir, O. Unal, S. Ates, H. Gokce, M.S. Gok, page 487,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.487

Thermodynamic Properties of Potassium Oxide (K2O) Nanoparticles by Molecular Dynamics Simulations
V. Guder, S. Senturk Dalgic, page 490,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.490

Fume Formation Rate Analysis of Shipbuilding Steel with SMAW Using Taguchi Design and ANOVA
T. Mert, S. Ekinci, page 495,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.495

Synthesis and Optical Properties of Co and Zn-Based Metal Oxide Nanoparticle Thin Films
E. Gungor, T. Gungor, D. Caliskan, E. Ozbay, page 500,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.500

Applying a Numerical Model to Obtain the Temperature Distribution while Machining
N. Melzi, M. Temmar, M. Ouali, page 504,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.504

Theoretical and Experimental Study of a Cement Finish Mill
R. Magraoui, M. Temmar, page 507,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.507

Mechanical Properties of Soda-Lime-Silica Glasses with Variable Peanut Shell Contents
B. Aktas, M. Albaskara, S. Yalcin, K. Dogru, page 511,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.511

Role of Operational Radioprotection Simulation in the Dismantling of the Protection and Control Rods of VVR-S Reactor
I. Iorga, R. Deju, D. Gurau, M. Mincu, page 514,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.514

New Kinetic Theory for Absorption and Emission Rates of Radiation and New Equations for Lattice and Electronic Heat Capacities, Enthalpies and Entropies of Solids: Application to Copper
A.E. Bozdoğan, page 519,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.519

Simulation of LYSO Crystal for the TAC-PF Electromagnetic Calorimeter
F. Kocak, I. Tapan, page 527,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.527

Physical and Mechanical Properties of Silica Fume and Calcium Hydroxide Based Geopolymers
N.U. Kockal, O. Beycan, N. Gulmez, page 530,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.530

Preparation of SnO2 Thin Film Nanostructure for CO Gas Sensor Using Ultrasonic Spray Pyrolysis and Chemical Bath Deposition Technique
B. Yuliarto, G. Gumilar, D.W. Zulhendri, Nugraha, N.L.W. Septiani, page 534,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.534

Mathematical Modeling of Heat Effect on Cable Insulation
E. Eroglu, I. Guney, I. Gunes, E. Sener, page 539,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.539

Evaluation of Rheological Behaviour upon Recycling of an Ethylene Vinyl Acetate Copolymer by Means of Twin-Screw Extrusion Process
M. Fatih Ergin, I. Aydin, page 542,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.542

Characterization and Valorization of Industrial Wastes (Molecular Sieves) in the Gas Complex of GP1/Z by BET and Surface Charge Method
K.L Belarbi, M. Hadjel, page 545,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.545

Examination of the Electric Field Intensity Distribution Between Wet Surfaces During Cable Aging Process
I. Gunes, page 548,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.548

The Grey-Based Taguchi Method: Optimisation of Drilling of Hybrid Aluminum Matrix Composites
M. Ay, Y. Altunpak, S. Hartomacıoğlu, page 551,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.551

Improvement of the Surface Properties of Polystyrene Sheets via UV Curable Organic-Inorganic Hybrid Coatings
H. Demirer, İ. Kartal, M. Çakir, page 555,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.555

Wear Properties of Hybrid Epoxy Composites Reinforced with Carbon/Kevlar/Glass Fabrics
İ. Kartal, H. Demirer, page 559,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.559

Mechanism and Kinetic Parameters of the Thermal Decomposition of Gibbsite Al(OH)3 by Thermogravimetric Analysis
D. Redaoui, F. Sahnoune, M. Heraiz, A. Raghdi, page 562,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.562

Phase Transformation and Sintering of Algeria Clay Powder
L. Beddiar, F. Sahnoune, M. Heraiz, D. Redaoui, page 566,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.566

Green Synthesis of PD Nanoparticles via Gallic Acid
M. Can, page 569,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.569

An in Vitro Comparison of the Enamel Remineralisation Potential of Bioactive Glass, Hydroxyapatite and CPP-ACP
Z.A. Güçlü, E.S. Gjorgievska, N.J. Coleman, page 571,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.571

Effect of Yttria on the Phase Formation and Sintering of HA-Al2O3 Biocomposites
K.E. Öksüz, A. Özer, page 576,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.576

Composite Sponges for in Situ Alveolar Bone Regeneration Following Tooth Extraction
Z.A. Guclu, A.P Hurt, L. Ohia, N.J. Coleman, page 580,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.580

A Study of the Dynamic Anterior Cervical Plate Implant by Computer Aided Virtual Engineering Method
Ö. Karaçalı, page 584,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.584

Parametric and Structural Analysis of Dynamic Anterior Cervical Biomaterial Plate Implant by Computer Aided Virtual Engineering
Ö. Karaçalı, page 588,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.588

A Statistical Forecasting of Mechanical Properties of Mg-Ca Alloys Using Taguchi Design
L. Feray Guleryuz, R. Ipek, I. Arıtman, S. Karaoglu, page 592,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.592

Investigation of the Delamination Factor of Glass Sphere and Silicon Particle Reinforced (GS-SCR) Hybrid Composite Material
M. Dundar, F. Ficici, F. Ozen, H. Unal, page 595,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.595

Effects of Terpolymer Addition on the Thermal and Termomechanical Properties of Poly(Phenylene Sulfide)
B. Cetin, A.E. Sahin, T. Yilmaz, T. Sinmazcelik, I. Curgul, page 598,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.598

Synthesis of the in-Situ Si3N4-SiC Composite Nano Powders by Carbothermal Reduction
F. Çalışkan, E. Kocaman, S. Cömert, page 601,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.601

Comparison of Quasi-Static Constitutive Equations and Modeling of Flow Curves for Austenitic 304 and Ferritic 430 Stainless Steels
B. Sener, M.E. Yurci, page 605,  abstract   Full Text PDF
DOI: 10.12693/APhysPolA.131.605