Optimum Heat Treatment Conditions Determination for Mg-Diffused MgB2

Ö. Çiçek, K. Yakinci Department of Basic Engineering Sciences, Faculty of Engineering and Natural Sciences, İskenderun Technical University, Central Campus, Meydan District, Ibrahim Karaoglanoglu Street, No: 56/5, 31200, Hatay, Turkey

Full Text PDF

MgB2 superconducting pellets were synthesized by the Mg diffusion method. Different heat treatment temperatures and times were applied for synthesis to determine optimum conditions. The phase structure of the samples was investigated by X-ray diffraction measurements. MgB2 lattice parameters, MgO fractions, and crystal sizes were calculated. It was observed from the scanning electron microscope images that the grains were well connected and the grain sizes were homogeneous after heat treatment at 650° and 12 h. As a result of magnetization measurements, it was determined that the critical temperature of the samples that were heat-treated at 650 and 700° for 6 and 12 h showed close values, and the transition intervals were sharp. The critical current density values calculated according to the Bean model were found to be around 104 A/cm2 for 625° samples and increased to 105 A/cm2 for 650 and 700° samples. The highest critical current density value under 0 T at 20 K was obtained as 1.58×105 A/cm2 for the 700° for 6 h sample. It was determined that the irreversibility field values determined according to the 100 A/cm2 criterion were close for 650 and 700° heat treatments. The pinning mechanism analyzed by the Dew-Hughes approach was detected as grain boundary pinning in 650 and 700° samples. It was shown that the minimum temperature for the heat treatment to be applied for the Mg diffusion method should be 650°, and the extended heat treatment duration made no serious difference.

DOI:10.12693/APhysPolA.145.324 topics: MgB2 bulks, Rietveld refinement, Jc, mag, grain boundary pinning